Reasons why the car air conditioner is not working:
1. Check whether the fan motor is stuck, whether the coil is short circuited or open circuited. Or with the replacement method, the replacement fan can be attached directly without installation. If a good fan spins, there is nothing wrong with the circuit and controls. It turned out that the fan was broken. If the replaced fan does not work, there may be a problem with the circuit and the switch, and the general repairman has experience.
2. If the compressor is working but the fan does not rotate, it may be that the main control switch is in poor contact, the fan motor coil is damaged, the set screw between the fan motor and the fan blade is loose, and the fan capacitor is open or short circuited. It may also be caused by the aging of the fan.
3. Poor contact of the main control switch
Maintenance method: Use a multimeter to measure the contact resistance of the main control switch. If the resistance is too high or zero, there is a fault and should be repaired or replaced immediately.
4. The fan motor coil is damaged
Maintenance method: Use a multimeter to measure the contact resistance of the main control switch. If the resistance is too high or zero, there is a fault.
5. Loosen the fastening screws between the motor and fan blades.
Maintenance method: Tighten the set screws.
If the air conditioner does not turn on, it will cause heat dissipation problems in the follow-up air conditioner, resulting in high pressure protection of the air conditioner system, and the protection shutdown of the air conditioner compressor.

