Parts Two:Applications of automotive sensors.

May 25, 2023 Leave a message

1. The principle of the control system: through the pedal sensor installed on the accelerator pedal, the pedal information is transmitted to the throttle control module in the electronic controller, and the throttle control module calculates the opening of the throttle through a certain processing program and drives the DC The motor completes the adjustment of the intake channel area of the throttle valve, thereby controlling the intake air volume and meeting the intake air demand of the engine under different working conditions.

2. Knock sensor function: detect the vibration of the engine cylinder for the electronic controller to identify the engine knock condition. Principle: The knock sensor is a vibration acceleration sensor. It is installed on the cylinder block of the engine, and one or more can be installed. The sensitive element of the sensor is a piezoelectric crystal. When the engine knocks, the engine vibration is transmitted to the crystal through the mass in the sensor. Due to the pressure generated by the vibration of the mass block, the piezoelectric crystal generates voltage on the two polar surfaces, and converts the vibration into a voltage signal for output.

3. Idle speed regulator function: provide idle speed bypass air channel, and affect the bypass air volume by changing the cross-sectional area of the channel, so as to realize the closed-loop control of engine speed at idle speed.

Principle: A permanent magnet that can rotate freely on the shaft in the idle speed regulator is rigidly connected with a rotating slider. The permanent magnet can rotate under the drive of the cable coil to make the slider rotate accordingly. The angular position of the slider determines the opening of the actuator bypass air passage, so the bypass air volume can be adjusted. The electronic controller determines the angular position of the slider by changing the duty cycle of the pulse signal sent to the actuator, thereby determining the bypass air flow.

4. Oxygen sensor function: measure the oxygen content in the engine exhaust, and determine whether the gasoline and air are completely combusted. According to this information, the electronic controller realizes the closed-loop control aiming at the excess air coefficient λ=1, so as to ensure that the three-way catalytic converter has the maximum conversion efficiency for the three pollutants of HC, CO and NOX in the exhaust.

Principle: The sensing element of the oxygen sensor is a ceramic tube, the outer side is ventilated, and the inner side is ventilated. The ceramic tube is a solid electrolyte. After heating, the catalyst on the outer wall of the ceramic tube makes various components in the exhaust chemically react, and oxygen ions can diffuse through the ceramic tube.

5. Throttle position sensor Function: Provide engine load information and working condition information.

Principle: The sensor is actually an angle potentiometer with a linear output characteristic. The potentiometer rotating arm is coaxially installed with the throttle valve. When the throttle valve rotates, the potentiometer rotating arm is driven to slide to a certain resistance position, and the potentiometer outputs a voltage signal proportional to the throttle valve position.


Send Inquiry