Loosen the nuts of the four wheels in diagonal order, do not unscrew them completely, use a lift to lift the car, use a socket to completely unscrew the wheel nuts in diagonal order, remove the wheel, and disassemble the brake cylinder Down to access the shock, remove the arm retaining bolt, then unscrew the spring arm retaining nut.
Fix the shock absorber arm with a caliper jack, open the engine hood and loosen the body fixing nut at the upper end of the shock absorber, turn the caliper jack to lift the shock absorber arm upward until the lower end of the shock absorber is separated from the fixing part of the front axle, and remove the shock absorber After the shock, use a shock spring remover to hold the spring in place.
Replace the damaged parts of the shock absorber and the rubber cover. Generally, the shock absorber spring does not need to be replaced if there is no serious corrosion or breakage. When reassembling the shock absorber, it is necessary to apply grease to improve the anti-wear properties.
Fix the shock absorber arm with a caliper jack, lift the shock absorber arm upwards, and ensure that the bottom of the shock absorber can be placed on the front axle support, use bolts to fix the lower end of the shock absorber arm and the front axle together, and fix the spring support nut on the lever arm, then screw the upper body mounting nut on the shock absorber into place.
After replacing the shock absorber, fix the fixing nuts of the four wheels sequentially in a diagonal order, then use the lift to lower the car, use a wrench to screw the fixing nuts of the wheels, and perform four-wheel alignment.

